New Arrivals

Height Adjustment: Min: 4-¾" Max: 9" Weight: 11 oz Model- BT10 Learn More

Features Replaces standard M4 Carbine-type plastic hand guards Compatible with most piston-driven as well as 'direct impingement' gas systems Easy to install utilizing existing delta ring and round or triangular front hand guard retaining cap M-LOK slots at the two, six, and ten o'clock positions for mounting MIL-STD-1913 Picatinny rails or other direct-attach M-LOK accessories Reinforced, heat-resistant polymer construction Integral riveted aluminum heat shield Front lip and side extensions, shields hand from hot gas block Relieved area at the top rear accommodates many overhanging optic mounts Specifications MOE M-LOK Hand Guard, Carbine-Length Weight: 6.8 oz. Length, overall: 7.1 in. Length, mounting: 6.6 in. Height, excluding lip: 2.5 in. Width, max: 2.2 in. NOTE: The MOE M-LOK Hand Guard – Carbine-Length is a direct replacement for existing M4 carbine type hand guards and utilizes the existing front hand guard retaining cap and delta ring. Learn More

The NSR handguard was designed with the goal of being the lightest and smallest free floating forend option to the M16 family of weapons. The width of the NSR handguard before accessories have been installed is only 1.48" The NSR handguard is available for sale as standard equipment on our rifles and upper assemblies, as well as a separate component for sale to the public. Available in 7", 9", 11", 13.5",15" and 16.7" lengths. The KeyMod inter-locking rail system is a collaboration between Vltor Weapon Systems and Noveske Rifleworks. Separately, both companies were in development of their own systems, but later realizing that both systems were similar, a standardization of the KeyMod system came to be. The KeyMod system offers a mounting platform for a variety of (future) accessories and components. The days of the Picatinny Rail (MIL-STD-1913) are numbered. The future of the direct mountable accessory is here and now. The KeyMod self-contained components/mounting hardware index and V-block onto the platform, achieving a secured and accurate hold to the system, while separate lugs take the recoil force off the fasteners. The pass through attachment method eliminates the need for loose screws and backing plates that can easily be lost, or difficult to install. Another advantage of the KeyMod system over the 1913 system is the direct attach eliminates the need for the 1913 system as a "middle Man" thereby reducing weight and accessory off-set from the center of the handguard. Learn More

P/N 30168 KAC 1/2x28 5.56QDC MAMS Muzzle Brake Learn More

The AD-RECON mount features the Patented QD Auto Lock™ Lever system which has the following advantages: Does not require proprietary tools for adjustment. Can be adjusted with your finger or a flat blade screwdriver. Lever can be configured to lock to the front or the rear. Superior clamping surface to insure maximum rail engagement. MATERIALS & CONSTRUCTION The AD-RECON mount is precision CNC machined from a block of 6061 T6 aluminum and finished in hard coat type 3 Mil-Spec anodize for a rock hard lasting finish. Precision machined from 6061 T6 Aluminum. Hard coat anodized for a lifetime of performance. Fully adjustable to fit both in spec and out of spec rail systems. American Defense MFG, LLC. products feature a lifetime warranty. Features the Patented QD Auto Lock™ Lever system. Made with pride in the U.S.A. AMDEF Learn More

Noveske Full Auto Bolt Carrier Group. These are assembled in house with a Viton 2 o-ring around the extractor spring. The carrier key is PROPERLY staked. Learn More

As professional Tactical Shooting Instructors and former operators, we wanted to develop a base pad and magazine well that would allow a speed reload and support one-handed weapons manipulation. The Viking Tactics / Salient Arms (VTAC/SAI) Magazine Base Pad used with the VTAC/SAI Magazine Well have met our high standards for a quality product and superb craftsmanship. Installation is simple and can be conducted without any modification to your firearm or magazines. These products are made in the USA from Aircraft Grade Aluminum then Type 3 Hard Coat Anodized for increased durability. The edges of the VTAC/SAI Magazine Glock Base Pad are conducive to one-handed operation and do not require modification to your current magazine bodies. You will be able to easily hook the edge of the base pad on your belt, pocket, or the edge of your holster to pry the magazine free if you experience a malfunction. G17/G22/G34/G35 Compatible with Gen 4 Glocks Learn More

AR15 Compatible - fits all AR15 lower receivers with mil-spec .250" diameter front pivot and rear takedown pin holes. Patent Pending Pivot Pin & Takedown Pin Head Designs - greatly improved gripping surface and pull strength without the use of oversize heads. Low Profile Pin Heads - low drag and never in the way. Lower profile than mil-spec pin heads. Ambidextrous Safety Compatible - the ETP-Ti (Enhanced Takedown Pin) head design does not obstruct the use of the right side ambi safety selector lever. Extended Pin Tips (+0.030" over milspec) - added tip length noticeably aids in starting/pushing the pins out from the left side of the receiver, without undue protrusion. Bullet Tip Guide - cone shaped recess at both pin tips prevent accidental bullet or tool slip and reduced the chance of scratching/damaging of the receiver. Patent Pending EZ Guide Channel - The additional EZ Guide Channel provides easy, assisted installation of the BAD-EPP-Ti (Enhanced Pivot Pin - Titanium). No more lost detents and springs. Light Weight - .016 lbs / .256 oz - approximately 50% weight savings from standard steel pin sets. Each BAD-EPS comes with (1) ETP, (1) EPP, (2) KNS hardened stainless steel detents, (2) 17-7 nickel plated stainless steel pin springs, and (1) high-strength neodymium magnet for hassle free magnet assisted installation of the Enhanced Pivot Pin. Proudly designed and manufactured in the U.S.A. Learn More

SIG SAUER® introduces the SBX Pistol Stabilizing Brace, an update to the SB15 Pistol Stabilizing brace, a shooter’s aid that is designed to improve the single-handed shooting performance of buffer tube equipped pistols. The SBX features a more slim design with a thicker strap for extra stability. This veteran-designed and U.S.-manufactured accessory enhances accuracy and reduces felt recoil when using an AR-style pistol. Made from high-quality, elasto-polymer, the SB15 is manufactured to close tolerances and fits all pistols equipped with an AR-style buffer tube 1.0” – 1.2” in diameter. The Pistol Stabilizing Brace uses the operator’s forearm to provide stable support, thereby minimizing accuracy-robbing spin and shift. A flexible cuff with two adjustable nylon straps allows the SB15 to be custom fit to any user. Features - Fits all pistols equipped with an AR-style buffer tube 1.0" - 1.2" in diameter. - ATF compliant* - Veteran designed - Made in USA - Quick and easy to install * ATF has reviewed this product and determined that attaching the SB15 to a firearm does not alter the classification of the firearm or subject the firearm to NFA control. Learn More